How to Clean Mold in your Home?

Mold Home Cleanup, Tips from the EPA

Who should do the cleanup depends on a number of factors. One consideration is the size of the mold problem. If the moldy area is less than about 10 square feet (less than roughly a 3 ft. by 3 ft. patch), in most cases, you can handle the job yourself, follow the guidelines. However:

If you already have a mold problem - ACT QUICKLY. Mold damages what it grows on. The longer it grows, the more damage it can cause.

Leaky window - mold is beginning to rot the wooden frame and windowsill.

• If there has been a lot of water damage, and/or mold growth covers more than 10 square feet, consult EPA's Mold Remediation in Schools and Commercial Buildings. Although focused on schools and commercial buildings, this document is applicable to other building types.
   
• If you choose to hire a contractor (or other professional service provider) to do the cleanup, make sure the contractor has experience cleaning up mold. Check references and ask the contractor to follow the recommendations in EPA's Mold Remediation in Schools and Commercial Buildings, the guidelines of the American Conference of Governmental Industrial Hygenists (ACGIH), or other guidelines from professional or government organizations.
   
• If you suspect that the heating/ventilation/air conditioning (HVAC) system may be contaminated with mold (it is part of an identified moisture problem, for instance, or there is mold near the intake to the system), consult EPA's guide Should You Have the Air Ducts in Your Home Cleaned? before taking further action. Do not run the HVAC system if you know or suspect that it is contaminated with mold - it could spread mold throughout the building.
   
• If the water and/or mold damage was caused by sewage or other contaminated water, then call in a professional who has experience cleaning and fixing buildings damaged by contaminated water.
   
• If you have health concerns, consult a health professional before starting cleanup.

Top of page

Mold Cleanup Guidelines

Tips and techniques

The tips and techniques presented in this section will help you clean up your mold problem. Professional cleaners or remediators may use methods not covered in this publication. Please note that mold may cause staining and cosmetic damage. It may not be possible to clean an item so that its original appearance is restored.

Mold growing on the underside of a plastic lawn chair in an area where rainwater drips through and deposits organic material.Click on the image for a larger version.

Mold growing on a piece of ceiling tile. Click on the image for a larger version.

• Fix plumbing leaks and other water problems as soon as possible. Dry all items completely.
   
• Scrub mold off hard surfaces with detergent and water, and dry completely.
   
• Absorbent or porous materials, such as ceiling tiles and carpet, may have to be thrown away if they become moldy. Mold can grow on or fill in the empty spaces and crevices of porous materials, so the mold may be difficult or impossible to remove completely.
   
• Avoid exposing yourself or others to mold (see discussions: What to Wear When Cleaning Moldy Areas and Hidden Mold).
   
• Do not paint or caulk moldy surfaces. Clean up the mold and dry the surfaces before painting. Paint applied over moldy surfaces is likely to peel.
   
• If you are unsure about how to clean an item, or if the item is expensive or of sentimental value, you may wish to consult a specialist. Specialists in furniture repair, restoration, painting, art restoration and conservation, carpet and rug cleaning, water damage, and fire or water restoration are commonly listed in phone books. Be sure to ask for and check references. Look for specialists who are affiliated with professional organizations.

Bathroom Tip

Places that are often or always damp can be hard to maintain completely free of mold. If there's some mold in the shower or elsewhere in the bathroom that seems to reappear, increasing ventilation (running a fan or opening a window) andcleaning more frequentlywill usually prevent mold from recurring, or at least keep the mold to a minimum

Top of page

What to Wear When Cleaning Moldy Areas

It is important to take precautions to LIMIT YOUR EXPOSURE to mold and mold spores.

Cleaning while wearing N-95 respirator, gloves and goggles. Click on the image for a larger version.

• Avoid breathing in mold or mold spores. In order to limit your exposure to airborne mold, you may want to wear an N-95 respirator, available at many hardware stores and from companies that advertise on the Internet. (They cost about $12 to $25.) Some N-95 respirators resemble a paper dust mask with a nozzle on the front, others are made primarily of plastic or rubber and have removable cartridges that trap most of the mold spores from entering. In order to be effective, the respirator or mask must fit properly, so carefully follow the instructions supplied with the respirator. Please note that the Occupational Safety and Health Administration (OSHA) requires that respirators fit properly (fit testing) when used in an occupational setting; consult OSHA for more information (800-321-OSHA or www.osha.gov).
   
• Wear gloves. Long gloves that extend to the middle of the forearm are recommended. When working with water and a mild detergent, ordinary household rubber gloves may be used. If you are using a disinfectant, a biocide such as chlorine bleach, or a strong cleaning solution, you should select gloves made from natural rubber, neoprene, nitrile, polyurethane, or PVC (see Cleanup and Biocides). Avoid touching mold or moldy items with your bare hands.
   
• Wear goggles. Goggles that do not have ventilation holes are recommended. Avoid getting mold or mold spores in your eyes.

How Do I Know When the Remediation or Cleanup is Finished?

Mold growing on a suitcase stored in a humid basement.Click on the image for a larger version.

You must have completely fixed the water or moisture problem before the cleanup or remediation can be considered finished.

• You should have completed mold removal. Visible mold and moldy odors should not be present. Please note that mold may cause staining and cosmetic damage.
   
• You should have revisited the site(s) shortly after cleanup and it should show no signs of water damage or mold growth.
   
• People should have been able to occupy or re-occupy the area without health complaints or physical symptoms.
   
• Ultimately, this is a judgment call; there is no easy answer. If you have concerns or questions consult our Frequently Asked Questions database and ask a question if you don't find what you need.

About Steve Zivolich and Guaranteed Property Inspections: www.gpinspect.com

Steve Zivolich, M.A., the owner/operator of Guaranteed Property Inspection and Mold Investigation Inc. has been providing property and environmental inspections for over 15 years in Orange County and Southern California.

Steve Z. has performed over 6,000 home inspections, mold, energy and environmental inspections and is fully certified and insured to meet all your inspection needs. He personally provides all field inspection services and as a result is able to maintain the highest Better Business Bureau rating of A+.

Steve has extensive training and years of experience as a home, mold, energy and environmental inspector that will guarantee that you receive the most thorough, state of the art and comprehensive inspection that follows current industry standards of practice and codes of ethics, a true value and education at a fair price. He conducts every inspection, as if he were moving his own family into the property. Steve also backs up every home inspection with a 90 day warranty, that is purchased on your behalf from American Home Warranty Association.

Unlike other home inspection companies, who will need to refer you to an environmental and/or energy audit contractor, Steve is a nationally certified expert that can handle the job without making you jump through hoops to hire additional people before the end of your inspection period, including the areas of: mold, asbestos, allergens, child safety, radon, formaldehyde, energy, EMF, water quality, and VOC's. As a result of his advanced training, he is able to offer a FREE energy audit and FREE mold investigation as well, with each home inspection.
.
Please take the time to read through Steve's home inspector credentials and qualifications as this is so important when hiring an inspector. Don't focus on price alone, focus on value, quality, experience and professionalism. When you hire an inspector, any inspector, you are hiring their individual knowledge, experience and qualifications so make sure you hire the best, not just the cheapest. We are confident that you will be Steve's next satisfied customer.